Kingston 8GB NoteBook RAM PC4-3200 CL22 260-Pin SODIMM [ KVR32S22S6/8 ]

Kingston 8GB Note Book RAM PC4-3200 CL22 260-Pin SODIMM

Kingston 8GB DDR4 3200/Notebook [ KVR32S22S6/8 ]

DESCRIPTION

This document describes ValueRAM’s KVR32S22S6/8 as a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

SPECIFICATIONS

CL(IDD)

22 cycles

Row Cycle Time (tRCmin)

45.75ns(min.)

Refresh to Active/Refresh // Command Time (tRFCmin)

350ns(min.)

Row Active Time (tRASmin)

32ns(min.)

UL Rating

94 V – 0

Operating Temperature

0o C to +85o C

Storage Temperature

-55o C to +100o C

FEATURES

Power Supply: VDD = 1.2V Typical

VDDQ = 1.2V Typical

VPP = 2.5V Typical

VDDSPD = 2.2V to 3.6V

Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

Low-power auto self refresh (LPASR)

Data bus inversion (DBI) for data bus

On-die VREFDQ generation and calibration

Single-rank

On-board I2 serial presence-detect (SPD) EEPROM

8 internal banks; 2 groups of 4 banks each

Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

Selectable BC4 or BL8 on-the-fly (OTF)

Fly-by topology

Terminated control command and address bus

PCB: Height 1.18” (30.00mm)

RoHS Compliant and Halogen-Free